Wind Turbine 9m Guyed Tower Kit & Mast Sections
The Leading Edge 9m Guyed Tower kit is a complete tower assembly suitable for the LE-300, LE-450 & LE-600 wind turbines or any wind turbine that requires a 48.3mm diameter mounting. This means this mast can also be used for all AIR wind turbines. Used as a cost effective solution to getting your Leading Edge Turbine airborne, the tower is quick and easy to install with minimal tool requirements.
The tower is supplied in 3 separate 3m long tower sections that connect together to create a 9m tower. Alternatively, only 2 of the sections can be used to make a 6m tower – although a higher tower is recommended for better turbine performance.
This tower has been designed to be installed with the minimum of cost and effort! This means that in most cases concrete foundations are not required and the novel spiral earth anchors can be driven directly into the earth. Four guy anchors are used to secure eight stainless steel guy wires that are then connected to the tower in various positions. All of the guy wires are supplied crimped and terminated at one end and with all of the rigging screws and wire grips needed to adjust the guy wires to the correct length.
Constructed from heavy duty steel alloy, all components are galvanised to ensure years of trouble free service.
The 9m Guyed Tower is supplied with the following components:
Qty 3 x 3 Metre Sections
Qty 8 x Pre-fabricated Guy Ropes
Qty 1 x Hinging Base
Qty 4 x Ground Anchors
Qty 4 x Base Staples
Qty 8 x Rope Tensioner
Qty 1 x Fixings kit and Accessories
Available for pre-order as all tower kits are made to order.
|Max Tower Height||9m - 3 x 3m sections|
|Tower Foot Print||4.5m x 4.5m Squared|
|Tower Diameter||48.3mm Outer Tube Diameter (4mm Wall Thickness)|
|Materials||Heavy Duty Steel (Hot dip galvanised)|
|Guy Wires||3mm Steel Catenary Wire|