Anderson Power Cables 16mm.sq (~6 AWG)

In stock
SKU
CABLE-OFX2-16MM
£36.95
Anderson Power Cables 16mm.sq (~6 AWG)
Anderson Power Cables 16mm.sq (~6 AWG)

Our ECO Bespoke Marine Tinned Cables are deigned for low voltage DC systems (Max 60V).

This 16mm.sq cable is supplied cut to length, one red cable and one black cable with genuine Anderson SB120 connectors fitted on both ends or just one end as required.

Alternatively, you can choose from the dropdown menu to have one end with tinned M8, M10, M12 ring terminal ends as required.

The advantage of bespoke cables is that we can produce any variation you require, so if you cannot find the exact cable from the drop-down menus please just let us know.

The cable we use is the high-quality UK made OceanFlex tinned marine battery cable. 

OCEANFLEX® Cable is a thin wall low voltage tinned wiring cable designed for use in harsh environments, the copper strands are tin plated, which makes this cable more resistant to corrosion. Ideal for use as battery starter cable on boats, cars, motorcycles, motor homes, where a high grade corrosion resistant cable is required. 

We add a black PVC sheath to keep the cables tidy and to avoid tangles or damage to the cables. The black PVC sheath is cut to length as appropriate and fitted to the finished cable. This is fitted close to the Anderson connector ends and approximately 15-20cm short of the ring terminal ends to allow connection to battery terminals. We can adjust the length of the black PVC sheath on request.

WHY CHOOSE OCEANFLEX® ?

In harsh environments low voltage copper cables corrode over time, the copper oxidises turning black and in salt water environments copper forms a carbonate layer (turquoise). Both these elements cause the cable to have a decreased electrical conductivity. Eventually the cable weakens and causes electrical faults and failures.

OCEANFLEX® has been specifically designed to combat these problems. The copper conductors have been tin plated so that they are highly resistant to corrosion over short or long periods of time. Whether caused by moisture, water or salt water. Therefore OCEANFLEX® cables have a much greater life span compared to standard cables, which means lower repair/maintenance cost, less down time due to electrical faults and failures.

  • Manufactured in accordance with ISO 6722-1:2011 (class B) 105°C.
  • Suitable for 12v and 24v systems (maximum voltage 60v).
  • Single insulated extra flexible battery/welding cables designed for use in tough working environments.
  • Resistant to petrol, lubricating oils and diluted acids.
  • Cables are printed with the specification on the insulation.
  • Tinned Copper Conductors - PVC insulated -30ºC to 70ºC
  • Reduced insulation gives considerable savings in weight and volume.

 

CABLE SIZES & SPECIFICATIONS:

16mm² (6 AWG) - 203/0.30 - Capacity 110 Amps - Overall Diameter: 8.3mm

ANDERSON CONNECTOR USED - SB120 (120A)

SPECIFICATIONS

Cores manufactured to ISO 6722-1:2011 (class B) 105°C

Tinned Copper Conductors, PVC Insulated

Suitable for use at temperatures from -40ºC to 105ºC with excursions up to 120ºC

Twins and multicores PVC sheathed at 70ºC

Suitable for 12v and 24v systems (maximum 60v)

Good resistance to petrol, diesel, lubricating oils and diluted acid

Very good resistance to moisture

PVC insulation saves weight and offers good resistance to abrasion and cut through

Cables are printed with the specification on the insulation

Write Your Own Review
You're reviewing:Anderson Power Cables 16mm.sq (~6 AWG)
Your Rating