Leading Edge LE-600 Downwind Domestic Wind Turbine

In stock
SKU
E-304
£1,075.14
Leading Edge LE-600 Downwind Domestic Wind Turbine
Leading Edge LE-600 Downwind Domestic Wind Turbine Leading Edge LE-600 Downwind Domestic Wind Turbine Leading Edge LE-600 Downwind Domestic Wind Turbine Leading Edge LE-600 Downwind Domestic Wind Turbine Leading Edge LE-600 Downwind Domestic Wind Turbine Leading Edge LE-600 Downwind Domestic Wind Turbine Leading Edge LE-600 Downwind Domestic Wind Turbine

The LE-600 is a downwind domestic wind turbine that is light and robust, yet delivers a fantastic power output.

The LE-600 domestic wind turbine features a fully integrated axial flux 3-phase Permanent Magnet Generator using the latest, most powerful neodymium iron boron magnet technology.

This means the turbine has a very low cut-in speed so it will generate power at very low wind speeds, as well as delivering a higher output than the competition in higher wind speeds.

Designed and manufactured in the UK, the LE-600 uses Leading Edge Turbine’s proprietary WhispowerTM blade technology. This means the turbine rotor system is incredibly quiet, UV-resistant and extremely tough.

The LE-600 is built for the harshest environments - engineered from stainless steel and anodised aluminium and using sealed-for-life bearings. 

LE-600 Wind Systems

The best set-up for the LE-600 is using a tristar diversion charge controller and a 1000W dump load.  If your system is 24V or 48V then you'll require a 45A tristar controller.  If you are running 12V system then you will need a 60A tristar controller

The LE-600 is not suitable for locations where winds regularly gust over 18m/s (40mph) - please contact us to discuss more suitable turbines for these conditions. 



SPECIFICATIONS 

Turbine Type Downwind Horizontal Turbine
Power Output 160W at 8m/s (17.8mph)
Peak Output 750W
Cut-in Wind Speed 3 m/s (6.7mph)
Rotor Diameter 1.54m
Swept Area 1.86 m2
Rotor Type 3-Blade Downwind
Blade Material Glass Reinforced Nylon
Weight 19.5 kg
EPS Power Rating High
EPS Noise Rating Medium

Body Construction High quality aluminium alloys and stainless steel - hard anodized and powder coated
Generator Type Low inertia axial flux generator using Neodymium rare earth magnets
Control Mode Dump Load with Tristar Controller
Overspeed Braking Extra charge diverted to dump load
Mounting Pole 60.3 /50.0 mm Outer Diameter Tube x 3 / 4 mm Wall
Solar Input? Can be used with a solar PV system
Warranty 2 Years

 


These videos show you how to wire up a Leading Edge wind turbine system:

Part 1

Part 2

More Information
EPS Power Rating High
EPS Noise Rating Medium
Write Your Own Review
You're reviewing:Leading Edge LE-600 Downwind Domestic Wind Turbine
Your Rating
We found other products you might like!