Wind Turbine 7.5m Guyed Tower Kit

In stock
Wind Turbine 7.5m Guyed Tower Kit
Wind Turbine 7.5m Guyed Tower Kit Wind Turbine 7.5m Guyed Tower Kit

Recommended for use with the LE-300 and LE-600 wind turbines, this guyed tower kit includes all the equipment that you need to construct a guyed mast up to 7.5m – using reaidly available standard scaffold pole or one of our stainless steel mounting poles (poles not included). This guyed tower kit is a cost effective solution that simply requires a standard scaffold pole that can be sourced locally.

The tower kit can be installed and raised quickly and easily without need for special winches or equipment. The kit is specially designed so that no concrete foundations are required – the innovative earth anchors can be driven directly into the ground in most soil conditions. All of the guy wires are supplied crimped and terminated at one end and with all of the rigging screws and wire grips needed to adjust the guy wires to the correct length.

The Guyed Tower Kit is supplied with the following components:

Qty 1 x Hinging Tower Base

Qty 3 x Pre-fabricated Stainless Steel Guy Ropes

Qty 3 x Ground Anchors

Qty 4 x Base Staples

Qty 1 x Locking Collar

Qty 1 x Guy connection plate

Qty 3 x Rope Tensioner

Qty 1 x Fixings kit and Accessories


There are no poles included with this kit, as it is not cost effective to ship scaffold poles. Customers should source poles locally. Lead time on this item is usually 1-2 weeks, please check with us before ordering.



Max. Tower Height 7.5m (25ft)
Tower Foot Print 4m Diameter Pitch Circle
Tower Diameter 48.3mm Outer Tube Diameter (3mm or 4mm Wall Thickness)
Materials Heavy Duty Steel (zinc plated / powder coated)
Guy Wires 3mm Steel Catenary Wire
Weight 20Kg Approx
Warranty 2 years

Write Your Own Review
You're reviewing:Wind Turbine 7.5m Guyed Tower Kit
Your Rating